Miprom 1 Print/softstart

You are not logged in. [Log In] Home Forums Technical Questions Miprom 1 Print/softstart

0 registered members (), 11 guests, and 1 spider.

Key: Admin, Global Mod, Mod

Newest Members

Forum Statistics

Forums13

Topics6,561

Posts37,103

Members8,546

Most Online117
Jan 16th, 2020

Print Thread

#35343 - 06/08/23 11:21 PM Miprom 1 Print/softstart
Joined: Nov 2021 Posts: 52 Flyballgov journeyman
Flyballgov journeyman Joined: Nov 2021 Posts: 52	Is there any print available for Miprom 1 hydro..looking to see if adding a softstart is possible

#35347 - 06/09/23 10:07 PM Re: Miprom 1 Print/softstart [Re: Flyballgov]
Joined: Dec 2015 Posts: 1,551 Indirtwetrust ElevatorPractitioner
Indirtwetrust ElevatorPractitioner Joined: Dec 2015 Posts: 1,551 Local 18	You can actually buy the softstart kit from KoneSpares and the harness just plugs in. Not hard to wire it in otherwise though.

#35355 - 06/14/23 03:21 PM Re: Miprom 1 Print/softstart [Re: Indirtwetrust]
Joined: Nov 2021 Posts: 52 Flyballgov journeyman
Flyballgov journeyman Joined: Nov 2021 Posts: 52	Thanks for the info..yea I was able to find a print and get it squared away. I'll check out the kone spares next time

Photo Gallery

Page Time: 0.030s Queries: 15 (0.010s) Memory: 2.6634 MB (Peak: 2.8041 MB) Zlib disabled. Server Time: 2024-06-17 06:28:29 UTC