Payne elevator resistor overheated

0 members (), 25 guests, and 1 robot.

Key: Admin, Global Mod, Mod

Forum Statistics

Forums13

Topics7,385

Posts40,944

Members10,040

Most Online3,137
Apr 9th, 2026

Print Thread

Payne elevator resistor overheated #35403 06/24/23 06:46 PM
Joined: Jun 2023 Posts: 3 P Pauli466 stranger
Pauli466 stranger P Joined: Jun 2023 Posts: 3	https://photos.app.goo.gl/CVF5b8dPNo89qXSv8. Resistor overheated still trying to dig up some schematics Last edited by Pauli466; 06/24/23 07:04 PM.

Re: Payne elevator resistor overheated Pauli466 #35404 06/24/23 10:14 PM
Joined: Jun 2023 Posts: 3 P Pauli466 stranger
Pauli466 stranger P Joined: Jun 2023 Posts: 3	Originally Posted by Pauli466 https://photos.app.goo.gl/CVF5b8dPNo89qXSv8. Resistor overheated still trying to dig up some schematics I've been looking for corroded loose connections. I can't find anyone familiar with this ancient system, looks like I'm on my own here Last edited by Pauli466; 06/24/23 10:16 PM. Reason: misspelling's

Re: Payne elevator resistor overheated Pauli466 #35406 06/26/23 01:44 AM
Joined: Aug 2013 Posts: 69 M Msd journeyman
Msd journeyman M Joined: Aug 2013 Posts: 69	Hi, controller looks like either OThompson, MG. If the resistor is in series with the brake coil usually is 150ohm 225watts 8 - 10". Wired to be a holding voltage If parallel would be a dumping resistor about 1500ohms. Assuming the brake is a DC coil, not an AC wet brake.

Re: Payne elevator resistor overheated Pauli466 #36146 10/21/23 02:14 PM
Joined: Mar 2016 Posts: 1 N nalahim stranger
nalahim stranger N Joined: Mar 2016 Posts: 1	Still need assistance? lmk

Link Copied to Clipboard

Photo Gallery

service tool laptop
by dunkdadrunk, February 4

rip orona
by epic_ecodisc, January 7

what controller is this?!
by Alex_ELMAN, December 4

HW PM
by Chris, January 13

Drive sheave
by jkh, October 10

The best helper.
by Adrian, August 8

Home Forums General Discussion Technical Questions Payne elevator resistor overheated