I'm really having problem with this v3f20 drive. This is the case. I have a marine elevator with tms 600 v3f20 drive. I change the main board from the v3 f20 but didn't work. I am copying all parameters from the old pcb into the new one with invomon program. When I tried to do the learning shaft it starts but after 2 sec stop with stfail error. I manage to get one other new pcb but didn't work either. The problem now is that although relays are on, no movement of the elevator.
Is it something I need to do extra to the new pcb when I replace it?
Ps1 I have an elevator that has the same pcb. I took that one insert the parameters and it works right away. PS2 both of the new pcb the elevator works in inspection mode.
Is it possible both of the new pcbs are faulty? Or they have different software and cant synchronized with old pcbs of the rest tms 600? I'm sending to photos one of the old pcb and one of the new.
