|
|
|
0 members (),
24
guests, and
2
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,939
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Dec 2023
Posts: 6
stranger
|
|
stranger
Joined: Dec 2023
Posts: 6 |
Thank you for all you insights, So here in another update, yes the elevator is low rise only, it uses just CCBE, I have checked the instruction on the manual and by disconnecting XB18 from CCB, Car Communication Ok LED light up and inspection mode, photocell and close force limiter led turned off, but the XB18 was connected to LCE ALM that is connected to alarm and COP, checked all the wirings and boards on COP all is normal, tried replacing CCB from its working duplex elevator still the same error, checked also the travelling cable +24 v getting 27v same as to working elevator. [img]https://ibb.co/CBGLm4L[/img]
we can manually drive the elevator on RDF but not on Inspection mode
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
