|
|
|
0 members (),
27
guests, and
4
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,944
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Feb 2016
Posts: 9
stranger
|
|
stranger
Joined: Feb 2016
Posts: 9 |
I was wondering if anyone knew how to disable the doors from opening and place the car on auto calls? I know on the KONE KCM cars you can disable hall calls and doors opening with the dip switches, then change parameter 4-21 to 7 and it’ll go to random floors. Does the Tac32T have something similar?
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
Ya, door disconnect switch on the IOE board and set O61 to 1 for random cycle mode. If you’re going to leave it cycling for any length of time you’ll want to increase M13, (restart delay) to like 60 seconds so it doesn’t run non-stop.
|
|
|
|
|
Joined: Feb 2016
Posts: 9
stranger
|
|
stranger
Joined: Feb 2016
Posts: 9 |
Thanks. Would I have to set D26 to 1? All the units on site are defaulted to 0
|
|
|
|
|
Joined: Dec 2015
Posts: 1,766 Likes: 11
ElevatorPractitioner
|
|
ElevatorPractitioner
Joined: Dec 2015
Posts: 1,766 Likes: 11 |
You don’t have to use D26 when the controller has a door disconnect switch.
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
