1-87 says it’s not used in North America but if you’re going behind somebody it’s worth it to check. Strange problem, at his point I would almost condemn the cpu / software.
When I look at an LCE UI list old enough to show 7:51 only going to 254, 1:87 says nothing about not used in NA. Just EBD function must be enabled by this parameter. I be that’s it.. Software is just so old 1:87 does have to be used.
I did order an option board and have it but since I’ve tried every combination of inputs 5,6,&7 I know that the controller responds to all of them.
