Getting a 1085 fault. Tried multiple TECCR and always fail my TECF on hn1 the button board and HNB have been replaced I’m reading 60ohms between HC1L and HC1H. HC1L reads 2.4-2.5vdc and HC1H reads 2.5-2.6vdc. I have no usb on this job to download software I can get my hands on a generic. I guess I’m asking if I should bite the bullet and go with a CPUA board or if someone can think of something I missed? Any help is appreciated.
Last edited by Meno; 12/30/24 07:43 PM.
