I have not done that upgrade but Ive looked into doing it. It's going to be at least 2-3 days longer of an upgrade and probably cost more in material to do it and make it look nice and operate well.. I just put an movfr on an old Otis car and if you get your measurements right you can just cut down a gal header and mount it to the Otis door track and use a Z bracket in back or c channel to get your mounting platform. As for the wiring as long as it's a discreet it's no big deal.
Also I'd keep the Otis vane and door locks

Last edited by Bowtiedrooster16; 01/11/25 07:12 PM. Reason: More info