My 1989 vintage relay-based Inclinator of America elevator has a mysterious problem. This is a 3-landing automatic elevator.
The problem:
The car is on the 3rd floor. I call the elevator from the 1st floor. The elevator moves to the 2nd floor and stops there. When I press the call button at the first floor again, I hear relay chatter [a relay seems to go back and forth at a high frequency]. When I go to the 2nd floor, I can open the door and access the car (in other words, the elevator behaved as if I had pressed the 2nd floor button).
Any ideas what may be wrong? Happy to compensate for your response that leads to resolution of this mystery.
Thank you for reading. Feel free to email me at
[email protected] or call at 650-888-2656.
Stefan
