Hi all,
Working on a ECC V800 controller, the SDI screen shows "Hoistway Not Learned". Car will run on inspection but no not respond while on automatic. Hoistway data show shaftway table in proper increments. .e.g bottom is 0ft then 12ft then 20ft, having all values for all floors. Notice the SSAF relay not high due to no output from STI terminal. My DP1, DP2 functional. On the SDI I/O shows DPS will alternate in relationship with DP1 and DP2. UT and DT led funcationl in respect to the physical limits. Anyone have any insight. Anyone have the SDI User Manual?
