So got the software loaded, but couldn’t do the hoistway scan & can’t run on inspection. SAFE was out on the IO map, but I jumped out the safety string and got SAFE up. Doors are closed, D26=1, car on automatic but won’t do hoistway scan. I was looking at the different screens in IMS and saw this “Safe to Run” is open, but can’t find anything that controls it or how to make it up or if it’s even my problem. See attached photo. Also getting selector faults but suspect it’s because I need to do hoistway scan? Don’t see anything else wrong. Going back here Monday morning, so looking for any ideas. Thanks
