New here but been working on elevators for about 7 years and ironically own a lu/la lift at my house I bought a few years back. Originally when I bought the house it didnt work the door lock pull out saftey was broken repaired that and got it going again had it working for awhile. Used primarly for getting heavy items and grocerys as Im on pilings about 10 ft up off the ground but about this time last year it stopped working. I figured maybe the pan switch activated and caused it to stop working. I typically lower it using the manual lowering to lower it which may have caused my problem. Its chained hydro 2:1 right now the platform rests about 4 ft up because I lifted it using a hylift but somehow stuck on safeties I just started messing with it by raising the boom to disengegage safties and lower the platform but seems once tension is on the chains I can disengage the slack rope switchs but dont have any up to repick the platform so I can access the controller just to see it and troubleshoot. Im thinking maybe since its outside and in a saltwater enviroment theres more to the arm on that saftey that its not disengaging to let me lower the unit (maybe just rusted). Not familar with savaria or lulas for the matter but trying to get a better understanding to get this thing down and peek into the controller at least without raising the platform all the way up. Anything helps Id love a wiring diagram. If anybody has access to some material or diagrams or even input Id appreciate it
