If you wish to go AWOL and upgrade the whole kit n' Kaboodle, You no longer have to buy an MOVFE_HH and replace the whole operator. You can just upgrade the existing. GAL now has an MOVFR3. No, you don't have to buy the whole operator because it's based on the MONXT platform and does not use physical limit switches. It's also multi-voltage (line and signal). You can just order the motor and the drive. It can be installed on just about any, except MONXT, operator of GAL/ECI/MAC (pre-PMSSC) origin. You could put it on an old QKS 14/15, 895/1000. You could even put it on older GAL stuff such as a vintage QL, I-Motion I or II, MOD/MOH/MOAP, Dupar shoe drive. It might even go on an Otis OVL. It's like their version of MCE Smartraq, but better. No cams to install. You don't even have to disasemble the control box on your old operator. You can just change out the motor and mount the new operator control box anywhere on the cartop.
https://www.gal.com/wp-content/uploads/2025/03/MOVFR3-Door-Operator-DOC-0171N-1.pdf
