Had to replace the CPUA board on one. We are not able to get it to take the hall network teach command. We have error codes of 1125 through 1128. Car runs from car calls, just not from hall stations. We have two other buildings exactly like this one and verified the settings are the same. Got to by an issue that we are not doing correctly. As the car was running before, we would just have to reset the cpua board. It escapes me now what the original fault code was, but the solution was to reload software or defective CPUA board. We reloaded the software and never was able to get the original CPUA board back on. Replaced the board and here we are. we are doing the TECCR first, but fails on the next command of teach front hn.
