This is the first time ive had the pleasure of working on one of these. Here's what we've got on the HIT:
3620 no drive comm EI=0000
0033 cant remember exactly what this was. power up related i think
status 90
all four asterisks will occasionally come on usually after a reset. status 01 before the 3620 comes back
it wont run on hoistway access or on inspection after a 101 reset or clean power off with battery plug removed in the jamb.
I would like to access the drive but im unable to move the car to do so. 2 stop 3500lb car about 2 years old. I suppose the plan at this point is to move weights onto to the car and figure out how to manually pick the brake and drift the car down.
Does anyone know how to do this on these controllers? Or any suggestions? Thanks
