Hello everyone, I have a DATAMAN 48PRO2C burner device I have been trying to burn an OTIS OMU component for a long time and I can't In the dataman 40 version, yes I can burn. Maybe someone has tried this burner version and is able to burn on a dataman 48pro2c? I have an omu adapter with which I connect, and it doesn't work for me, dataman support tried to help me and was unsuccessful
Hi I'm trying and can't find a solution You wrote here several types of models I tried them all without success. I would like to know what the exact model is for h21 and what the exact model is for h2 (One wrote w and one wrote M I think there is a difference) I am attaching a picture of my device, their support did not help me either. Does anyone have this model of the burner? I don't understand why in the basic burner version dataman40 it works great, and in the burner version dataman 48pro2c it doesn't work.
Another question: Although I am a veteran technician in the profession, it always confuses me and I always try this and that and I just didn't understand what h2 is used for and what h21 is used for teda, gecb, controller, compass, if anyone has any diagram appendix or can give me details that I can write to me forever I would be very happy (: Many thanks
H2 =4mb M25P32-V [SOIC16] H1 =2mb M25P16-V [SOIC16] H21 =4mb OMU2 W25Q32JVxxxQ [SOIC16] or [SOIC8-200] depending on which adapter you are using.
The OMU2 won’t work on some older products without a patch. It sounds like your issue would reside with Dataman. I know the 40Pro and S9 work but cannot speak for your version.
