Looking for some assistance or prints. We have a General Elevator in Baltimore. Traction with MG set. Car runs on normal, answering car and hall calls, but upon arriving to the floor, O relay doesn’t pick. O relay will pick up if we hold up SE relay. From the car the doors will open with the door open button. Also when we put on phase 1, the elevator recalls and the door opens.
Car has a GAL MOD operator and a Cedes edge. The prints on the job aren’t the original prints for the elevator. If you think you have a set that is more accurate, please reach out.
Any thought or help would be appreciated.
Last edited by redeye_smooth; 03/04/26 02:01 PM.
