Home Forums General Discussion Technical Questions KONE F0152 - V1 NTS STOPPING FAULT

Previous Thread

Next Thread

KONE F0152 - V1 NTS STOPPING FAULT #40788 03/12/26 08:19 AM Joined: Dec 2023 Posts: 6 G Galaxy23 stranger Galaxy23 stranger G Joined: Dec 2023 Posts: 6 Hello Good day to all, we are encountering fault 152 NTS STOPPING FAULT on a Monospace elevator with KDM Drive. Fault usually appears after long run from top to bottom or vice versa but resumes to normal automatically and after car call is registered. We have already replaced Car Guide rail shoe to ensure Magnet switches does not go out of alignment, replace DCBG, perform Load testing, change Magnet switches 61 and 77 but still the fault still persist. We can perform test run and complete shaft setup however after some time fault 152 is encountered Could anyone share their experience and solution about this, Thanks in Advance Vators

Entire Thread Subject Posted By Posted KONE F0152 - V1 NTS STOPPING FAULT Galaxy23 03/12/26 08:19 AM Re: KONE F0152 - V1 NTS STOPPING FAULT Galaxy23 03/12/26 08:22 AM Re: KONE F0152 - V1 NTS STOPPING FAULT MX4 03/12/26 09:16 PM Re: KONE F0152 - V1 NTS STOPPING FAULT Galaxy23 03/13/26 03:30 AM Re: KONE F0152 - V1 NTS STOPPING FAULT MX4 03/13/26 04:14 AM