Home Forums General Discussion Technical Questions CPI - TMI Board

Hello everyone,

I am looking for technical information about the jumper settings on a TMI2 elevator controller board.

Does anyone have documentation, service manuals, schematics, or technical notes describing the function of each jumper on the TMI board?

I am particularly interested in:

- The purpose of each jumper.
- Hardware configuration options controlled by the jumpers.
- Whether any jumpers affect software configuration or available motor types.
- Any jumper settings related to board initialization, EPROM configuration, or controller setup.

The reason for my question is that I am troubleshooting a system where a replacement TMI board does not behave exactly like the original one. After transferring the EPROM (27C1001) from the original board, parameter P40 on the CPI programmer only shows a limited motor selection and does not allow selection of DAF210.

Therefore, I am trying to determine whether the available motor types and controller configuration depend only on the EPROM contents or if some jumper settings on the TMI board also play a role.

Any documentation, board photos with jumper descriptions, manuals, or personal experience would be greatly appreciated.

Thank you.