|
|
|
0 members (),
45
guests, and
1
robot. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
|
|
1
|
2
|
3
|
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
Forums13
Topics7,404
Posts41,025
Members10,053
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Aug 2019
Posts: 8
stranger
|
|
stranger
Joined: Aug 2019
Posts: 8 |
Hi , I have to link the access control to an Otis gen2. I’ve seen in the past it’s been done using RS to interface. Could anyone as idiot with help with any information on how this is done?
|
|
|
|
|
Joined: May 2019
Posts: 62 Likes: 1
journeyman
|
|
journeyman
Joined: May 2019
Posts: 62 Likes: 1 |
It’s going to require a few software changes. Depending on how many floors and if you want individual floor lockout will determine how many RS modules you will need.
Basics are enable card reader security (IO 326).
Program CC Card Reader inputs to your RS board address and bits.
Wire your floor relays to each corresponding input/bit on the RS board(s).
|
|
|
|
|
Joined: Aug 2019
Posts: 8
stranger
|
|
stranger
Joined: Aug 2019
Posts: 8 |
Thanks for the reply , I have 12 floors and they want to individual floor lock out. This is how I thought it was done. But I’ve only seen it running after install never had to install it as an addition.
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
