Home Forums General Discussion Technical Questions Tac32 fault 1736

Does anyone have an updated fault list that would explain what a 1736 fault is?

Any help greatly appreciated.
An updated error code list would be more so.

Pm or email. Thanks.

SPT configuration out of date. I have manual TAC32T 55514 V3.2 if you need that?

Have you tried reconfig the safety processor?

Configure SP
1. Place the controller on Inspection Operation.
2. Move the SP PROG jumper (JP2) to the 1-2 position.
3. Issue SPTConfig Command, and Config Complete displays. Controller UIT: Block Select Adjustments > Commands Startup > SPTConfig.
4. Move the SP PROG jumper (JP2) to the 2-3 position.
5. Return the car to service.

Bring car to bottom landing first.

Thanks. Yeah I would love a copy of that manual. If you would be so kind.