I finally got a replacement drive for a job that was down for PEA power supply issues. I started by trying to save the drive parameters by using IMS v2.17.16 but when going to diagnostics green drive it said incompatible drive type. I went ahead and swapped out the drives but now it seems the IP system is stuck waiting for packets to arrive. IP green light on and IP red blinking rapidly. RP RED on solid. Did I miss a step or should I be trying to connect straight to the drives? It seems to trip a 714 fault every 20 minutes or so but I’m guessing that has to do with the drive not being updated. Getting frustrated quickly! I attached a picture of the drive status screen.
