|
|
|
0 members (),
39
guests, and
1
robot. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
|
29
|
30
|
|
|
|
|
|
|
|
Forums13
Topics7,434
Posts41,129
Members10,071
| |
Most Online3,137 Apr 9th, 2026
|
|
|
|
Joined: Sep 2025
Posts: 14
Elevator Apprentice
|
|
Elevator Apprentice
Joined: Sep 2025
Posts: 14 |
Good Morning, we have a Otis 6840. Timer tube lights up after determined time but it never shuts the generator off. Any help or light in this? We replaced the capacitor in the back of it with the same type and still not working. ![[Linked Image from i.imgur.com]](https://i.imgur.com/RY55CsG.jpeg) ![[Linked Image from i.imgur.com]](https://i.imgur.com/foj5PdG.jpeg) Attached some pictures
Last edited by falconflare; 11/17/26 02:03 PM.
|
|
|
|
|
Joined: Dec 2010
Posts: 646 Likes: 7
addict
|
|
addict
Joined: Dec 2010
Posts: 646 Likes: 7 |
Does the bi-metal contact strip open (or close) when the MGT timer tube lights up? It appears the gap is adjustable at the top.
|
|
1 member likes this:
NewMech |
|
|
|
|
Joined: Sep 2025
Posts: 14
Elevator Apprentice
|
|
Elevator Apprentice
Joined: Sep 2025
Posts: 14 |
The bi-metal strip never moves, even when the tube lights up. Its always touch the front part on top, I’m starting to think if it could be the coil that pulls it back, that went bad?
|
|
|
|
|
Joined: Sep 2025
Posts: 14
Elevator Apprentice
|
|
Elevator Apprentice
Joined: Sep 2025
Posts: 14 |
|
|
|
|
|
Joined: Dec 2010
Posts: 646 Likes: 7
addict
|
|
addict
Joined: Dec 2010
Posts: 646 Likes: 7 |
If you manually push the contact closed when the tube lights (and there’s no motion!), does the generator shut down? Could be the coil. Be sure the contact itself moves freely from NC to NO. That looks to be an adjustable pot for time to the right of the tube. Note the time when the car parks until the tube lights. Mark it and try 1/4 turns (or more if no change) in or out and see if there’s any change.
Last edited by elmcannic; 11/19/26 08:25 PM.
|
|
1 member likes this:
NewMech |
|
|
|
|
Joined: Jul 2013
Posts: 207
enthusiast
|
|
enthusiast
Joined: Jul 2013
Posts: 207 |
Tube failure is common on this timer.
If you can find another tube, give that a shot.
Otis sells a replacement timer assembly with a contactor and Artisan timer.
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|