Ok I been working on this DMC for 2 days . The fire department came in and ripped the door open to get out a stick passenger . My two issues are .
1. When car is level with Lobby floor the car goes to take off in high speed . It gets about 3inches then blows the f1 fuse . Happened like four times . If you jump out the whole circuit and move it on inspection past the first floor it's fine .
2. When level with the second floor or third ect. The car goes into down leveling and shuts down in door zone . Car will not move at all .
Any help is much appreciated . This elevator is driving me bananas ...
