|
|
|
0 members (),
25
guests, and
4
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
S |
M |
T |
W |
T |
F |
S |
|
|
|
1
|
2
|
3
|
4
|
5
|
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
|
27
|
28
|
29
|
30
|
|
|
|
|
|
Forums13
Topics7,385
Posts40,944
Members10,040
| |
Most Online3,137
Apr 9th, 2026
|
|
|
|
Joined: Oct 2010
Posts: 32
Wrench
|
|
Wrench
Joined: Oct 2010
Posts: 32 |
Hey, guys we were doing some testing on a Dover Composite the other and found the Counterweight buffer switch had been tripped but the car was still running normal not going into reduced speed. So we also checked the car buffers, same deal still runs high speed. Checked out the switches all making and breaking when tripped. So we went up to the machineroom looking to see if the Circuit had been jumped out. Didn't see any jumper any where and we tried looking on the print and could find this circuit. Would you guys happen to have any idea what page this circuit would be on or what they call it? Thanks
Just can't leave it alone!
|
|
|
|
|
Joined: Jan 2010
Posts: 671
addict
|
|
addict
Joined: Jan 2010
Posts: 671 |
Shouldnt opening a buffer switch kill the safety string and not put the car in reduced speed????? I would think the buffer switches may be wired in series with the pit switch. On most units they run test points back to the controller so you can break down a circut but not always. I would not trust my pit switch without checking things out very carefully. GOOD LUCK
|
|
|
|
|
Joined: Oct 2010
Posts: 32
Wrench
|
|
Wrench
Joined: Oct 2010
Posts: 32 |
Well on these cars, they are suppose to run reduced speed when the switch is open, like the rest of the cars in the bank. Yeah I guess a quick fix would wire into the pit switch but I want to try and atlease figure this circuit out.
Just can't leave it alone!
|
|
|
|
|
Joined: Sep 2009
Posts: 404
Administrator
|
|
Administrator
Joined: Sep 2009
Posts: 404 |
Hey Brian, if you look on the S+ side of the 1F relay coil just before the MOX2 contact you'll see your buffer switch terminal CCB. My guess is someone has placed a jumper between S+ and CCB.
Good Luck!
|
|
|
|
|
Joined: Oct 2010
Posts: 32
Wrench
|
|
Wrench
Joined: Oct 2010
Posts: 32 |
Hey Brian, if you look on the S+ side of the 1F relay coil just before the MOX2 contact you'll see your buffer switch terminal CCB. My guess is someone has placed a jumper between S+ and CCB.
Good Luck! Nice I'll check that out. Thanks
Last edited by Brian Pevehouse; 10/04/10 04:35 AM.
Just can't leave it alone!
|
|
|
|
|
|
|
|
|
HW PM
by Chris, January 13
|
|
|
|
|
|
|
|
|
|
|
|
