Home Forums Active Threads

Hello
I am in need of what I believe to be a 60’s GAL hydro print or it could possibly be a O Thompson. Thanks in advance.

How are folks ordering from Adams these days? They are not answering emails or returning phone calls. I spoke with one of the reps last month and she said that there were only two of them.

Hello, I have a 4 stops hydro 2 front and 2 rear with IDD32 Door operators. I've been having an ongoing issue with the fault 76. It says " Error Drive 76 Safety End" Extra Info is "0x0004006B.
The elevator runs, open the door (front or rear), put a car call, door closes and nothing! push door open, and it opens. Controller show 76 FATL.
Sometimes it works and the fault seems to self reset after a while, but it keeps happening at the front or the back. checked the looks, gate switch and magnet for the DCL.
I do have the 4 light on the door relays coming on.
Could it be the timing of the sequence for DCL, Gate and door lock?
Also, when it works, before arriving the floor, (front or rear) sometimes we hear a sound from the front door operator, sounds like the it force the closing and belt jumping.
I thought it could be the IDD operator, I swapped it whit a spare, but it was giving the same 76 fault, so I put it back.

Please any input would be appreciated,
Thank you.

Hi, I have a car that when keyed to phase 1 runs floor to floor like it’s lost. My rotary switches for main and alternate and others all check out ok. When I go into F5 though both parameters 23 and 26 read back 00 meaning top floor. I checked the other simplex which does work, and it has the same feedback in F5. I’m wondering if that’s just a feature of this generation and if there’s any way to tell if maybe that rotary switch is bad. J and M if I remember correctly.

Just throwing this out there to see if someone might have any prints.

I just took out a Tricon Controller and the group cabinet. All the boards are fine and intact, the machine just got old.

Let me know if you need any or have any questions.

Hi all

IGV - Domus Eagle PCB Touch Key Pad or Laptop Software

Can any one help if we can still obtain either Cod. IGV:Q500442 (New Keypad) or the laptop software to get into the parameters settings we have a job that the lithium battery has gone flat on Eagle board and power failure and the board has lost memory