0 registered members (),
15
guests, and
4
spiders. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
26
|
27
|
28
|
29
|
30
|
31
|
|
|
Forums13
Topics6,535
Posts36,966
Members8,461
|
Most Online117 Jan 16th, 2020
|
|
|
#33541 - 07/31/22 11:30 AM
Re: DMC Software
[Re: SomeGuy]
|
Joined: Sep 2010
Posts: 40
SomeGuy
newbie
|
newbie
Joined: Sep 2010
Posts: 40
|
I'm almost certain that anything but the very oldest software will work.
In the Sees catalog they list the software as one part number only. Of course they don't have any. As long as all of the chips are there, I think it would work.
I'll be glad to pay you for them.
Last edited by SomeGuy; 07/31/22 11:42 AM.
|
|
|
#33555 - 08/01/22 01:42 PM
Re: DMC Software
[Re: Indirtwetrust]
|
Joined: Sep 2010
Posts: 40
SomeGuy
newbie
|
newbie
Joined: Sep 2010
Posts: 40
|
T If you have an older CLC card like anything before 6300BP4 you need a 675ANnn. Newest is AN13. For a BP4 CLC you need a 675DKnn. Newest is AN13. Different versions for a DMC1-A without a selector and if there’s an “SP” at the end of the number it means special, like job specific generic. You’d have to get that from Vertical Express. Good info. This job does have a selector. Am I right in thinking that we could use the latest software, even if this job started out with an older CLC card that was later updated? Vertical Express is evidently out of the business of selling DMC software. I guess it had to eventually happen when they stopped selling the boards.
|
|
|
#33558 - 08/01/22 08:04 PM
Re: DMC Software
[Re: Indirtwetrust]
|
Joined: Sep 2010
Posts: 40
SomeGuy
newbie
|
newbie
Joined: Sep 2010
Posts: 40
|
It doesn’t matter what the job came with. Only which CLC is in it now. There are a lot of other versions too but mostly I see AN and DK. The point is the newest CLC (6300BP4) requires different software than all the older CLC cards. So if you’re going to copy software from another car, make sure you get compatible software. Thanks very much
|
|
|
#33561 - 08/01/22 10:48 PM
Re: DMC Software
[Re: SomeGuy]
|
Joined: Sep 2010
Posts: 40
SomeGuy
newbie
|
newbie
Joined: Sep 2010
Posts: 40
|
Thanks. Ordering now.
Wow. No easily obtainable stock. I see why TK isn't selling them.
Last edited by SomeGuy; 08/01/22 10:51 PM.
|
|
|
#33582 - 08/04/22 05:38 PM
Re: DMC Software
[Re: SomeGuy]
|
Joined: Sep 2010
Posts: 40
SomeGuy
newbie
|
newbie
Joined: Sep 2010
Posts: 40
|
Here's where I'm at.
I've got a BP4 board, and 675DK13 software. It cranks up, takes parameters etc, but doesn't seem to want to talk to the door board and selector properly. Once in a while it'll get selector status, but won't give me SUP to do a learn run. The door board won't learn either.
Selector and door board software incompatible?
Door Board 675AB1 675AB2
Selector 675A01
Original CLC software was 675AA1
Last edited by SomeGuy; 08/04/22 05:38 PM.
|
|
|
#33584 - 08/04/22 05:56 PM
Re: DMC Software
[Re: SomeGuy]
|
Joined: Sep 2010
Posts: 40
SomeGuy
newbie
|
newbie
Joined: Sep 2010
Posts: 40
|
It was having a door issue. A tech replaced the door board, and the clc wouldn't come up again when it was powered back up. Tried other boards, but no luck.
Last edited by SomeGuy; 08/04/22 05:58 PM.
|
|
|
|
|