I can’t seem to find the setting LSP-NY. The rope gripper doesn’t set during unintended motion test and book says to check that this is set to one. Any help greatly appreciated. Thanks John
Looking through some notes now I question my above answer, I DONT have anything for 311 gem but to find that same parameter on other controllers they appear to be the same (311MECS, gen2 etc)
They give the gov trip solenoid as an option to activate the governor to provide unintended motion protection? Lord help the folks on those cars. Of all the Otis' I have only roughly 1/2 do the governor solenoids have the oomph to reset the switch (apollo govs). I wouldn't want to trust it to set it in that scenario.
